How to turn humming into MIDI (and fix the notes)

Humming is the fastest way to get a melody out of your head before it disappears. A voice is harder to transcribe than a piano, though: pitch slides, breath noise and long vowels all confuse an automatic converter. This guide walks through the whole path, from the recording to a clean MIDI part.

1. Record a short, clean take

Use your phone’s voice recorder, 20–40 cm from your mouth, in a quiet room. Keep it short: one phrase or one section at a time converts better than a whole song.

  • Give every note a soft start, like “da” or “doo”, instead of one long “mmm”. Clear note starts are what the converter listens for.
  • Hum a little louder than you think you need, but stay well below clipping.
  • Turn off any effects or auto-tune in the recording app.

2. Convert it in your browser

Open the audio-to-MIDI converter, drop the file in (MP3 or WAV, up to 5 minutes on a computer) and press Convert. The recording stays on your device; nothing is uploaded. If you just want to see what to expect first, try the built-in “Humming” example.

3. Listen against the original

Play the result with “Both” selected: your recording and the MIDI at the same time. Use the balance slider to bring one forward. Wrong notes stand out much faster by ear than by looking at the piano roll.

4. Settings that matter for voice

Open “Conversion settings” if the result looks messy. Changing them re-reads the original conversion, so you can try values freely.

  • Keep melody only: a voice is one line, so this removes stray notes underneath it.
  • Shortest note: raise it if breath noise and pitch wobble turn into many tiny notes.
  • Note sensitivity: lower it if quiet noises become notes, raise it if soft notes go missing.

5. Fix what’s left by hand

A hummed note that drifts in pitch may come out split into two notes, or a semitone off. Click a note to select it, drag it up or down to change the pitch, drag its right edge to make it longer, and press Delete to remove extra notes. Undo works as you would expect. The assistant can do bulk edits too, like transposing everything or removing very short notes; it only suggests, you apply.

6. Export and use it in your DAW

Export the .mid file and drag it into Ableton Live, FL Studio, Logic, GarageBand or any other DAW. It comes in as a plain MIDI part, so put it on any instrument you like: a piano, a synth lead or strings.

Hum something and convert it